Home » Products » Control System » Art-Net-DMX512 Network Converter FD-CR02

Art-Net-DMX512 Network Converter FD-CR02

Share to:
2 standard DMX512 data output ports
ArtNet can be managed in broadcast
1 ArtNet data can be input
2 DMX512 data can be output
Art-Net-supported controllers

2 standard DMX512 data output ports are provided, supporting 2x170 LED pixels;

ArtNet can be managed in broadcast or unicast mode;

1 ArtNet data can be input, 2 DMX512 data can be output; (total can output  1024 channels)

All network configuration parameters can be directly modified through the built-in buttons and display (no need to connect to a computer for setting)

Other software, consoles, and Art-Net-supported controllers can be used to distribute Art- through the network  Net data.

Commonly used to expand the Tiger Touch or MA2 console, and the DMX output port of Madrix software

Istallation method: It can be installed with a light hook or any safe location.

Support two power supply methods: (mains and network cable power supply POE).

Art-Net-DMX512 Network Converter FD-CR02


FD-CR02 is standard Art-Net Node. Because of this, you can use the device with any application, console, or controller that supports Art-Net to distribute Art-Net data via Ethernet network. Commonly the FD-CR02 can be used to extend the DMX output ports of tiger touch and MA2.


Product Category

Contact us


Be the first to know about our latest products.
Leave a Message
Contact us


Quick link

Contact Us

  Room 1825, Building 1, No. 16, Yongfa 

Road, Huadu District, Guangzhou




Copyright © 2022 Guangzhou Fondlite Tech. Co., Ltd. All Rights Reserved. Sitemap | Support By Leadong